A laptop is a portable computer.
A laptop is the same computer as a personal computer. And it has the same parts, just smaller. That's why laptops are more expensive.
A laptop can be compared to a mobile phone, while a regular Personal Computer- with a regular home phone.
In order to open a disk, floppy disk or flash drive on a laptop, you must first insert it.
Let's start with the floppy disk:
Look at the laptop:
If the laptop has a special floppy drive, that is, a device for floppy disks, then you can open the floppy disk. But most laptops do not have this drive, since floppy disks are considered obsolete and unreliable.
You can learn more about floppy disks by reading the article “Floppy disks”.
To insert a floppy disk, there should be a hole like this:
If your computer does not have such a hole, then you can skip the next paragraph.
Insert the floppy disk along the arrow that is drawn on it until it stops (until it clicks). After you have inserted the floppy disk, go to “My Computer”. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click with the left mouse button on the icon
"Disk 3.5" (A):
You will see what is written on the floppy disk (files and folders). To remove a floppy disk from your computer, you must first close all files and folders that you opened from the floppy disk. Then press the small button under the hole into which the floppy disk was inserted. The floppy disk should pop out of the laptop on its own. Now about how to open a CD or DVD disc:
Either on the side or front of the laptop there is a storage device for disks. It's called a CD or DVD drive.
To open it, you need to press the small rectangular button.
When you press this button, a click will be heard and the drive will slide out slightly from the laptop. Gently “help” him move out all the way. Then you need to literally “put” the disk on it, shiny side down, and “push” it into the laptop until it clicks. After you have inserted the disc, wait 15 seconds: the disc may open on its own (this happens with discs on which movies and music are recorded). If this does not happen, open the My Computer icon. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click the left mouse button on the “CD drive” icon (can also be called CD-RW, DVD, DVD-RW drive).
What is recorded on the disk will open.
Now let’s learn how to open flash drives on a laptop. The flash drive looks like this:
In order to open a flash drive on a laptop, you need to insert it into a special hole:
You will find several of these holes either on the side or at the back.
After you insert the flash drive into one of the holes, open “My Computer” (let me remind you, it is either in “Start” or on the Desktop).
A new icon should appear there. For example, like this:
This icon is usually called "Removable Disk". Double-click on it with the left mouse button. You will see what is written on the flash drive (files and folders).
Before removing the flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.
The message "Safely remove USB storage device" appears. Click on it once with the left mouse button. The message “Hardware may be removed” will appear. Now you can remove the flash drive from your computer.
sites.google.com
How to watch a DVD on a computer or laptop, how to insert the disc correctly
There are many special players for reading DVDs.
Among them: PowerDVD, Windows Media Player, Media Player Classic.
To view the contents of the disc you will need one of these programs.
The easiest way is to use a player that is used by many Windows users, Media Player Classic.
It is worth remembering that the standard player sometimes does not recognize digital signatures and codecs, so you have to use other players.
Launch using PowerDVD
Unlike Media Player Classic, this program is paid. It can read media of any format, from MPEG and MP3 to ASF and WMA.
Launch using Windows Media Player
This program is available in every Windows computer, which makes it very convenient for reading discs. The playback manipulations are exactly the same as for Media Player Classic, however, this player has a number of its own features.
The player does not play files because:
- The DVD was recorded in a different region. Mircosoft products have algorithms that prevent pirated recordings from running.
- The standard player conflicts with other players. In such cases, you must stop using third-party software.
- The computer's optical drive is damaged.
- The file format is not compatible with the player.
composs.ru
Booting from a disk in a laptop
Booting from the disk in the laptop does not work, the instructions are lost, I pressed all the buttons on the keyboard that I could, as a result it started some process, now Windows will not boot, I also can’t get into the BIOS, help, HP laptop. When I read this request an acquaintance, he uttered an interesting phrase: “Can you imagine what will happen when it gets into the BIOS?” I imagined and even began to fear not for the laptop, but for the girl, because you can boot from the disk in the laptop without changing the settings in the BIOS.
We will give two examples with an HP laptop and a Sony VAIO. So our first laptop is HP.
I would like to note that the principle of changing the boot device is not the same for all laptops, and if you have experience with a device from one manufacturer, most likely you will experience difficulties with a laptop from another manufacturer. But as they say, you don’t need to be afraid of difficulties, think, after all, this computer is yours, aren’t you interested in finding out how it works, and you should even be able to handle things like setting boot from disk in your laptop or getting into the BIOS. I hope our article will help you and also, as soon as we get our hands on a laptop from any other manufacturer, screenshots of the boot selection will be immediately added to this article. Let's start with an HP laptop. One of the largest manufacturers information technologies in the world, he made sure that we did not experience any problems when working with his device and it was very easy to set it to boot from disk.
When you turn on the laptop, a prompt appears -> Press ESC to load the start menu, click.
The menu appears:
F-1 system information F-2 diagnostics F-9 (changing boot settings) will give us the opportunity to boot from the disk on the laptop without going into BIOSF-10 the terrible BIOSF-11 restoring the laptop to factory settings
We skip the first and second points and it’s so clear, let’s press F-9 Boot Device Options (change boot settings) and see what happens, press
This window appears, where they explain to us in the language of a potential enemy that if we are afraid to enter the BIOS, we can change the laptop boot from the disk here. We are glad that using the F-10 key, we can change the boot priority, by the way, now the boot is set just from the disk and if we reboot, and there is a DVD with the operating system in the drive, its installation will begin. The job is done, and now let’s look at our BIOS with the bravest ones, exit this menu and press ESC, the reboot occurs. When selecting the start menu, press ESC again and then F-10
And here we are in enemy territory, select the System Configuration option with the arrows on the keyboard and press Enter
Before us is the menu of this menu, select Boot Options
Here we allow or prohibit changing the boot from any device. Let me explain, for example, you see the latest Internal Network Adapter device (network loading) is set to Disabled,
This means that loading over the network is prohibited; if we set it to Enabled, then firstly, loading over the network will become possible, and secondly, the offer to boot over the network will appear at the very beginning, in the start menu. The start menu appears when the laptop boots, when you first press ESC and then F-9, where without going into the BIOS you can change the boot priority to the disk drive, this menu will look something like this. Note: unfortunately, when writing this article, we had already given away the laptop, so The screenshot was made in Photoshop.
Now go back and select the Boot Order option and press Enter
in this menu we see that the laptop is ordered to boot from the hard drive,
and we can choose whatever our heart desires, we want and boot from a flash drive, by the way, loading from a USB device is just below. By the way, you forgot that we are on enemy territory, so we quickly change the boot from the hard drive to the disk drive, move using the keyboard to our CD/DVD ROM, then using the F-6 key, as indicated on the right side of the BIOS window, pull out the CD/DVD ROM to the first position.
Next ESC, exit this menu, then ESC again and move to the Exit option, press Enter, we are asked to save the changes made, we agree Yes.
A reboot occurs and if there is a Windows disc in the drive, the installation process will begin. It's the turn of the Sony VAIO laptop. When you turn on the laptop, a prompt also appears to press F12, but this means booting over the network, we don’t have instructions for the motherboard, to get into the BIOS you basically need to press F2 or Delete when booting, less often, even less often, press F2 and enter the BIOS
Using the arrows on the keyboard, select the Boot tab, which is responsible for changing the boot device and press Enter
On the Boot tab, we see that the first boot device is a flash drive, select it using the keyboard and press Enter. In the menu that opens, select our Internal Optical Disc Drive
Now the first boot device is set to the floppy drive
www.imprice.ru
How to start a laptop from disk via BIOS
In order to start a laptop from a disk, you need to change the boot order of devices. By default, the work laptop has the following order: HDD, DVD drive, flash drives and so on. The CD may contain an installer program operating system, and full mobile version operating system so that if the laptop OS fails, you can repair it or save important data before reinstalling the OS.
To enable booting from a CD, you must enter the BIOS by pressing the “Delete” (Del) or “F2” button after turning on and before loading the operating system. On some laptops there are other BIOS entry buttons, but they are so rare that they are rather the exception to the rule.
In the BIOS, select the “Boot” or “Boot menu” tab. If there are no such tabs, in the “Advanced” tab you need to look for the line “Boot” or “Boot priority”. In the “Boot” tab or line, you should set the boot order so that the disk drive is in 1st place.
After this, you need to press F10 and Enter, or select Save settings and reboot in the last tab, thereby saving the new boot order settings.
Insert the boot disk into the drive, now booting from the CD will be performed automatically. After carrying out all the operations that require booting from disk, you should go into the BIOS again and set boot from first hard drive. This should be done to load the operating system faster.
If the first thing in the queue is booting from a DVD, then every time you turn on the laptop, the drive is first polled, and after the computer realizes that there is no disk in the drive or the disc is not bootable, it boots from the hard drive. At the same time, the loading time of the operating system increases.
SovetClub.ru
How to install boot from disk on HP
Every user remembers the BIOS (Basic Input/Output System) only when they need to reinstall the operating system from a disk. The key combination that calls up the start menu with the necessary options depends on the model for each laptop motherboard laptop computer. When loading, the system gives a hint for a certain combination, for example, for HP laptops it is the “Esc” button - “Press the Esc key for Startup Menu”.
One of the largest information technology manufacturers in the world, Hewlett-Packard, took care not only of hassle-free entry into the start menu to reset boot parameters, but also developed two options for changing settings: without entering the BIOS and directly in the BIOS environment. You can select the required item in the start menu:
- "F-1" - system information,
- “F-2” - system diagnostics,
- “F-9” - change boot settings,
- "F-10" - BIOS,
- “F-11” - restore the laptop to factory settings.
The “F-9” item allows you to change boot settings without using the BIOS menu. When you select this item, you are given a choice between a CD/DVD drive and an HP laptop hard drive. Navigation is carried out using the cursor keys, that is, the up and down arrows. The selected option is activated by pressing the “F-10” key, which confirms changes in the settings and, when a CD/DVD disk with the operating system is inserted into the drive, starts loading it.
Point “F-10” opens the BIOS environment for changing parameters. Navigation is also carried out using the cursor control keyboard. The name of the current section or subsection is displayed at the top of the window. To change settings you need the “System Configuration” section. In the menu that opens, the “Boot Options” section is responsible for changes, which provides a list of possible data download sources. If any value from this list is activated, then opposite it in quotes is the value “Enabled”; if not, then “Disabled”. Accordingly, we activate “CD-ROM Boot”. Below the list of possible activations there is a “Boot Order” option, which you must enter to change the order of boot places. By default, the list is headed by the laptop’s hard drive; to change the list, use the “F6” key to move “CD/DVD ROM” up to the first position. To exit to the main BIOS menu after the necessary changes, use the “Esc” key. In order for the changes to be saved, you need to confirm them when exiting the BIOS.
If in both cases, when changing the parameters, booting does not occur from the selected CD/DVD disk, then you need to make sure that the disk is multiboot and that there are no defects or damage to the disk. You can use Nero Express 6 to create a multiboot disk with an operating system such as Windows XP.
After you restart your HP laptop, the operating system will load from the drive. After installing the system, you will need to go into the BIOS again and return the boot settings from the hard drive.
This is a laptop computer.
A laptop is the same computer as a personal computer. And it has the same parts, just smaller. That's why laptops are more expensive.
A laptop can be compared to a mobile phone, and a regular personal computer can be compared to a regular home phone.
In order to open a disk, floppy disk or flash drive on a laptop, you need to insert them first.
Look at the laptop:
If the laptop has a special floppy drive, that is, a device for floppy disks, then you can open the floppy disk. But most laptops do not have this drive, since floppy disks are considered obsolete and unreliable.
You can learn more about floppy disks by reading the article "Floppy disks".
To insert a floppy disk, there should be a hole like this:
If your computer does not have such a hole, then you can skip the next paragraph.
Insert the floppy disk along the arrow that is drawn on it until it stops (until it clicks). After you have inserted the floppy disk, go to “My Computer”. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click with the left mouse button on the icon
"Disk 3.5" (A):
You will see what is written on the floppy disk (files and folders). To remove a floppy disk from your computer, you must first close all files and folders that you opened from the floppy disk. Then press the small button under the hole into which the floppy disk was inserted. The floppy disk should pop out of the laptop on its own. Now about how to open CD or DVD disk:
Either on the side or front of the laptop there is a storage device for disks. Is it called CD or DVD? drive.
To open it, you need to press the small rectangular button.
When you press this button, a click will be heard and the drive will slide out slightly from the laptop. Gently “help” him move out all the way. Then you need to literally “put” the disk on it, shiny side down, and “push” it into the laptop until it clicks. After you have inserted the disc, wait 15 seconds: the disc may open on its own (this happens with discs on which movies and music are recorded). If this does not happen, open the My Computer icon. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click the left mouse button on the “CD drive” icon (can also be called CD-RW, DVD, DVD-RW drive).
What is recorded on the disk will open.
Now let's learn open flash drives on a laptop. The flash drive looks like this:
In order to open a flash drive on a laptop, you need to insert it into a special hole:
You will find several of these holes either on the side or at the back.
After you insert the flash drive into one of the holes, open “My Computer” (let me remind you, it is either in “Start” or on the Desktop).
A new icon should appear there. For example, like this:
This icon is usually called "Removable Disk". Double-click on it with the left mouse button. You will see what is written on the flash drive (files and folders).
Before removing the flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.
The message "Safely remove USB storage device" appears. Click on it once with the left mouse button. The message “Hardware may be removed” will appear. Now you can remove the flash drive from your computer.
Requirements.
The article is applicable for Windows 2000/XP/Vista.
Information
When you insert a disc into a CD/DVD-ROM, the disc autoruns by default. Those. if the disc is a music disc, then it starts playing automatically, if the disc is with a game, then the game installation interface appears, etc.
Enabling and disabling autorun of CD/DVD discs using the registry.
Execute";
regedit and click "OK";
3. In the "Registry Editor" window, on the left side, sequentially expand the specified registry sections to the subsection " cdrom":
HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\ Services\cdrom
4. Left-click on the subsection cdrom and on the left side of the window find the option AutoRun;
5. Right-click on this option and select the menu item " Change";
6. In the "Value" field put 1
(enable autorun) or 0
(turn off autorun);
Enabling and disabling autorun of CD/DVD drives using group policies.
Windows 2000/XP.
1. From the "Start" menu, select " Execute";
2. In the "Open" field, enter the command gpedit.msc and click "OK";
User Configuration";
Administrative Templates";
5. In this folder, find and left click on the folder " System";
To disable autorun:
Disable autorun";
Properties";
8. Set the value " Enabled" and in the "Disable autoplay on" field, select " CD drives";
9. Click " OK";
To enable autorun:
6. On the right side of the window, find the policy " Disable autorun";
7. Right-click on this policy and select " Properties";
8. Set the value " Not specified";
9. Click " OK";
Windows Vista.
1. From the "Start" menu, select " Execute";
2. In the "Open" field, enter the command gpedit.msc and click "OK";
3. In the "Local Computer Policy" section, find and expand (by clicking on the "+") subsection " Computer configuration";
4. In this subsection, find and expand the folder " Administrative Templates";
5. In this folder, find and expand the folder " Windows components";
6. In this folder, find and left click on the folder " Autostart policies";
To disable autorun:
Disable autorun";
Properties";
9. Set the value " Enabled" and in the "Disable AutoPlay" field, select " CD drives";
10. Click " OK";
";
Properties";
13. Set the value " Enabled" and in the "Default startup behavior" field, select " Do not execute autorun commands";
14. Click " OK";
To enable autorun:
7. On the right side of the window, find the policy " Disable autorun";
8. Right-click on this policy and select " Properties";
9. Set the value " Not specified";
10. Click " OK";
11. On the right side of the window, find the policy " Default autorun option";
12. Right-click on this policy and select " Properties";
13. Set the value " Not specified";
14. Click " OK";
There are many special players for reading DVDs.
Among them: PowerDVD, Windows Media Player, Media Player Classic.
To view the contents of the disc you will need one of these programs.
The easiest way is to use a programmer that is used by many Windows users. Media Player Classic.
It is worth remembering that a standard player sometimes doesn't recognize digital signatures and codecs, so you have to use other players.
Launch using PowerDVD
Unlike Media Player Classic, this program paid. It can read media of any format, from MPEG and MP3 to ASF and WMA.
Launch using Windows Media Player
This program is available on every Windows computer, which makes it very convenient for reading disks. Playback manipulations are exactly the same as for Media Player Classic, however, this player has a number of its own features.
Player doesn't lose files because:
- DVD has been recorded in another region. Mircosoft products have algorithms that prevent pirated recordings from running.
- Standard player conflicts with other players. In such cases, you must stop using third-party software.
- Computer optical drive damaged.
- File format not compatible with the player.
We can connect almost any equipment to a modern computer and open almost any device. You can connect a camera, video camera, mobile phone, you can listen to music CDs and watch movies on DVD.
In this lesson we will learn how to open a disk and flash drive on a computer.
If you have a laptop, click
In order to open the disk or flash drive on your computer, you need to insert them first.
Let's start with CDs and DVDs:
Look at the system unit:
For disks on a computer there is a special thing that slides out, called a disk drive.
In order for us to insert a disk into it, the drive needs to “move out” of the computer. To do this, click the small button below it. When the drive comes out, place your disc on it. This could be a disc with music or a movie. Place it shiny side down.
By the way, there are discs that have shiny sides on both sides. These are double sided DVDs. That is, there is a recording on both sides.
To make the drive slide back in, press the small button underneath it again.
After you have inserted the disc, wait 15 seconds: it may open on its own on the computer (this happens with discs on which movies and music are recorded). If this does not happen, then open the “My Computer” icon. It is either located on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click with the left mouse button on the “CD drive” icon (it can also be called CD-RW, DVD, DVD-RW drive).
What is recorded on the disk will open.
Now let's learn open flash drives on the computer. The flash drive looks like this:
In order to open it on your computer, you need to insert the flash drive into a special hole in the system unit:
You will always find several such holes on the other side of the system unit - where the cords from the computer are inserted. And on modern computers there are such holes in the front.
After you insert the flash drive into one of the holes, open “My Computer” (let me remind you, it is either in “Start” or on the Desktop).
A new icon should appear there. For example, like this:
This icon is usually called "Removable Disk". Click on it twice with the left mouse button. The files and folders that are recorded on the flash drive should open in front of you.
Before removing the flash drive from the computer, click on the special icon at the bottom right (next to the clock) once with the left mouse button.
The message "Safely remove USB storage device" appears. Click on it once with the left mouse button. The message “Hardware may be removed” will appear. Now you can remove the flash drive from your computer.