Apple has always been distinguished by the laconic and stylish design of its devices, which is why, having many imitators in this market, almost all physical buttons have gradually been abandoned in favor of all mobile devices. But until there is a solution that would completely avoid buttons on modern mobile devices, be it iPhone, iPod Touch or iPad, we still resort to physical buttons, the main one of which is the Home button, since it is located on the front side devices. It would seem that there is only one button, but it turns out that a few users are faced with a problem when this button does not behave as it should. We will help you solve this problem.
iPhone home button not working? - There are three treatment options
.
Option 1. This is a rather unusual software method. calibrate home button. There are many users who have benefited from this procedure. This is done quite simply:
Launch any standard iOS app (Notes, Stocks, Clock, etc.)
After launching the application, press and hold the Power button located on the top of the device until a slider appears on the screen prompting you to turn off the device
After the shutdown slider appears, release the Power button and hold down the Home button, after about 10 seconds the application should force quit
All). It is rather difficult to check the effectiveness of this procedure, because the problem itself is quite rare, but according to the assurances of many users, such an operation solved their problem. If this does not solve your problem, there is a second option.
Option 2. To implement the second method of calibrating the Home button, we need pure alcohol and cotton wool. Our goal is to clean the button of dirt that got into it, which could cause incorrect behavior. This procedure is also simple:
Turn off your phone
Soak cotton wool in ethyl alcohol
Press the cotton firmly against the Home button
Press Home for a minute to let the alcohol seep under the button
Leave the iPhone for 15 minutes to allow the alcohol to evaporate
Ready. You can also use WD-40 instead of alcohol. After carrying out this procedure, your button should come to life. If this did not happen, go to the third option.
Option 3. Well, the third option is the simplest, but at first glance not the most economical (but in fact it may turn out to be the safest and most economical) - this is.
They often bring devices that, in addition to mechanical and software problems, are literally clogged with dust and dirt. Smartphones of even the most attentive and responsible users cannot avoid such a fate. But for every problem there is a solution, so today I will talk about methods of dealing with such a problem. And I'll show you how the service center specialists cope with this task.
This advice is not a call to action, but only shows a possible solution to the problem. However, such a procedure can be done independently. But be careful!
Step 1
First of all, the iPhone is cleaned of grease, dust and dirt on the case itself. The surest and easiest way is to take a cotton swab or disk, soak the tool in alcohol and thoroughly wipe the device, superficially cleaning large particles of dust and dirt from visible areas: at the junction of the display and case, near the camera eye, buttons and connectors.
Step 2
Next in line are hard-to-reach places: the interior of the headphone jack and lightning (or 30-pin), speaker and microphone openings. In this case, you will need a very thin tool like a toothpick or a pointed match. The main thing is that it should not be metal - there is a danger of damaging the contacts. But you also need to be careful with a wooden object, because you can break through the grid of a speaker or microphone without much effort.
To clean the charging and 3.5 mm connectors, it is better to wrap a small piece of cotton wool on the end of a toothpick and again soak it in alcohol - this way the dust will stick to the tool more, so it will be easier to remove dirt. In this way, you can clean the speaker and microphone holes on the iPhone 4/4s, but this trick will not work with newer models - the design of smartphones is different.
Step 3
A toothbrush is best for cleaning buttons and small holes. It will help get rid of dirt residues at the mode switch, Home and Power buttons, as well as at the junctions of the case and display.
Cleaning the iPhone from dust and dirt is not difficult, but rather painstaking. Of course, you can do external cleaning yourself, but in case of severe contamination that affects the performance of the gadget, it is better to contact service center. The charging connector and earpiece suffer the most from dust and dirt - without timely intervention, the modules can simply fail. Therefore, the intervention of specialists will already be required.
And if you just need to clean your iPhone and let it charge normally again, we will be happy to help. We don't even take money.
The "Home" button on mobile devices makes life much easier for users. Almost every modern smartphone can find this component. The iPhone has it too. Small, very active used button at the bottom of the phone, it is located directly below the display.
What to do if the iPhone 5S home button does not work? Why might a person experience this problem? How often does the problem occur among the owners of the brainchild of Apple? The answers to all these questions can be found below.
Typical breakdowns
You should pay attention to the fact that the "Home" button on "apple" phones is made of glass. It is fragile and easily damaged. Therefore, the owners of the gadget may encounter mechanical causes of component failure. Fortunately, this rarely happens in practice.
Why then does the iPhone 5S home button not work? Most often you have to meet with system failures and malfunctions. You can eliminate them both independently and by contacting service centers. It all depends on the individual owner. What advice and recommendations can be given to those who decided to correct the situation on their own?
About repair methods
It all depends on the specific situation. Of course, without finding out the cause of the failure, it will not be possible to repair the Home button. If we describe in general the possible solutions, then they come down to some actions.
Replacement 5S is a rare occurrence. It has already been said that mechanical damage occurs in smartphones, but not so often. Usually the fight against a broken button comes down to:
- Key calibration. No additional programs are required, all operations are carried out directly in the gadget.
- Correction of the position of the connector. Doesn't always work. Careless handling of the phone can lead to mechanical failure of the button.
- Cleaning the device. Pretty effective way to deal with the problem. Helps if the "Home" button on the iPhone 5S crunches.
- Substitution of a component at the hardware level. You can simply refuse to use the button on the iPhone and transfer the functions of this display.
In fact, all of the above methods are not difficult to implement. The main thing is to know how to act. Further, each method will be discussed in more detail.
Calibration
Most simple solution is the button calibration. This option helps in most cases. With it, it is recommended to start the fight against the phenomenon under study. Especially if the Home button on the iPhone 5S gets stuck. In fact, everything is easier than it seems.
Instructions for calibrating the "Home" key are as follows:
- Turn on mobile device. It is important to wait for it to fully download.
- Launch any regular application. It can be an organizer, calculator, calendar, and so on.
- Press the "Power" button. Hold it until the menu for turning off the smartphone appears. As soon as the corresponding window appears, release Power.
- Click on "Home". Hold the button in this state until the menu disappears.
That's all! This technique is called calibration! It, as already mentioned, helps a lot if the iPhone 5S does not have a "Home" button. Not everyone, but this method is really able to improve the situation for the better.
Connector position
But what if the "Home" button completely refused to perform its functions? It is with such circumstances that many smartphone owners often face. Replacing the "Home" button on the iPhone 5S (or any other phone) is not needed in this case. In any case, it is necessary to postpone this process.
To bring the "Home" button back to life, it is proposed to correct the position of the connector. The proposed method can be called non-standard. But, as practice shows, it turns out to be effective.
The whole procedure boils down to the following:
- You need to connect a USB cable to your iPhone.
- Put your finger on the plug in the smartphone connector.
- With a gentle movement from the bottom up, press the cable near the connection connector. After that, you need to click on "Home".
If after the procedure the button does not work, it is recommended to stop trying to adjust the connector. Effort can hurt mobile phone. And in addition to a broken button, you can also get a damaged connector for connecting the gadget to a PC.
Cleaning and lubrication
Home button crackles on iPhone 5S? It is likely that cleaning the component and lubricating it will help correct the situation. This process is not that difficult. Even a beginner can master it.
A broken button can be lubricated with cleaning products. For example, alcohol or WD-40. The second substance is often used in everyday life. It is he who is recommended to give preference in case of problems with smartphones. But you should be careful! WD-40 has a high fluidity. Excess applied to a smartphone substance can harm the iPhone.
Lubrication occurs as follows:
- Apply a little WD-40 (or any other cleaning agent) to the "Home" button.
- Press the key several times in successive movements. Approximately 15 times will have to repeat the procedure. This is done until the lubricant penetrates the gap between the smartphone panel and the Home button.
No further action is required. If alcohol has been applied, you will have to wait for it to evaporate. Usually it takes no more than 2 minutes.
Duplicate button
The last way to fix a button is to duplicate it. It has already been noticed that the iPhone can refuse the "Home" key, transferring its function to the display. What needs to be done for this?
In order to correct the situation, you can do the following:
- Go to "Settings" - "General". This must be done with the smartphone turned on.
- Open the Accessibility menu.
- Select AssistiveTouch in the appeared window. Set the switch to the "On" mode.
A translucent button will appear on the screen, clicking on which allows you to work with the "Home" button without using it directly.
conclusions
In fact, there is nothing difficult in fixing the Home key. Some users are wondering "Home" on iPhone 5S. It is not recommended to independently engage in the replacement of the component. Therefore, it is very difficult to get acquainted with such information.
If all of the above methods did not help, then it is best to take the smartphone to a service center. They will be able to determine the exact cause of the broken button and replace it if necessary.
There is one extremely annoying problem on many iPhone and iPad models. The Home button can start to creak a lot, causing serious inconvenience to users who do not expect poor build quality from their expensive devices. Fortunately, disassembling an iPhone or iPad in order to get rid of the squeak of the Home button is not always necessary. In this guide, we have covered a few effective ways, allowing you to solve the problem with the creaking Home button.
Calibrate the Home Button
One of the simplest, but truly miraculous ways to get rid of the problem is to calibrate the Home button. For this:
Step 1. Launch any standard app on iPhone and iPad, such as " Watch" or iBooks .
Step 2. Press the button Nutrition and hold it until the slider for turning off the device appears on the screen.
Step 3: Release the button Nutrition.
Step 4Press and hold the button Home until the screen changes (the system can throw you either to the main screen or return you to the previously launched application). You usually have to hold the Home button for about 5-10 seconds.
Ready! You have calibrated the Home button - now it will respond more adequately to pressing, and at the same time, the creak may disappear. Such a decision may seem frivolous to many, but positive reviews about this method on our forum indicate the opposite.
Lubricate the button with silicone
A more radical method of getting rid of the squeak of the Home button is to lubricate it with silicone. Spread the button with silicone, while hitting the gaps between the display and the button. Then remove excess silicone with a rag. In most cases, after this operation, the creak will disappear.
Note that lubricating the button with water can also help. Wet your thumb with water and press the button in such a way that water enters the gap between the button and the body. It is important not to overdo it and "treat" the Home button with a small amount of water. We emphasize again that the effectiveness of the method is indicated by user reviews on our forum .
Tighten the pentagon screws on the bottom of the device
Also, the broach of two five-sided Torx screws on the bottom of the iPhone can “cure” the creaking of the Home button. It is important to use a specialized screwdriver designed to work with these screws. In that case, tightening the screws can really save you the home button creaking problem.
See also.
Details Updated on 31.01.2017 12:15 Published on 07.08.2015 08:57 Author: nout-911How to Clean Your Home Button on iPhone and iPad
Looking at the design of Apple phones, you understand that the developers of these devices decided to make them concise and stylish at the same time. Coupled with the fact that the company has a lot of imitators in this market, they decided to simply abandon the physical buttons, completely replacing them with a touch screen.
But now not everyone is ready to switch to technology that does not contain buttons at all: volume control, camera shutter release, and the most important home button, all of them will be present on the devices of our time for a long time to come. This button allows the user to return to the main menu, but sometimes it may behave differently. This means that there is a malfunction in it, which urgently needs to be fixed. You can read many articles on how to clean the Home button on iPhone and iPad on your own, but we will tell you how to do it without harm to your device.
Home button not working? We offer three treatment options.
1. The first method differs in that you do not have to climb inside the device, because. All calibrations will be done using software. This option is good because it has many satisfied users who have benefited from it.
Initially, we launch one of the standard iOS applications: notes, clock, etc. When the application has started, are you required to hold down the Power button? which is located on the top end of your device. You must hold it until a dialog box appears prompting you to turn off your device. After that, release the pressed Power button and hold down the Home button for 10 seconds. After this time, the running application must be forcefully terminated.
This completes this method. It is rather difficult to check its effectiveness, but according to many users, carrying out such a procedure with their device solves the problem. This method gives the simplest explanations for the question " How to clean the Home button on iPhone and iPad yourself?".
2. The second method will require you to be precise with your hands. Prepare pure alcohol and cotton wool. The purpose of this operation will be to clean our Home button from all the dirt and dust that once got there. The sequence of actions is as follows:
Turn off your device;
- lightly soak the cotton wool with pure alcohol;
- with great effort, press the cotton wool against the button so that alcohol flows out of it a little;
- then for 1 minute, briefly press the button so that the alcohol can seep under it;
- leave the device for 15 minutes to evaporate excess alcohol.
The cleanup operation is now complete. If there is no alcohol, then you can use WD-40, which can also collect dust and dirt. Well, if this method did not help, then there is a third way for you.
3. The third way is the safest, most effective, but naturally the most expensive. Take your device to a service center. There with ease restore functionality of the Home button.
4.5 Rating 4.50 Vote - support the service!