The iPhone rarely crashes, but in some cases, after being dropped or exposed to moisture, a system failure may occur in which the iPhone does not respond to the on or off button. When faced with this problem, users ask: how to turn on iPhone?
In this article, we will look at the different available ways to turn on the iPhone, as well as in the case when a failure occurs and the Home or Power button does not work. How to turn on iPhone 5 or 4 if the smartphone is frozen and does not respond to buttons, and therefore does not follow commands?
Let's say you just purchased an iPhone 5. And in order to start a working smartphone, you need to hold down the POWER button for a few seconds and wait for the “Apple” logo to appear on the screen, after which the desktop menu with icons of programs and applications will open in front of you. In order to turn off the device, just hold down the POWER button again for a few seconds until the entry appears on the screen: Slide To Power Off, which means the “turn off” command. Swipe from left to right on this entry and the iPhone will go into shutdown mode. This is how the iPhone works in normal mode.
But, if your iPhone does not respond to button presses or freezes, what should you do? Try hard rebooting your iPhone by simultaneously holding down the Power button and the Home button for 10-30 seconds until the Apple logo and a beep sound appear. After this, the device screen will go dark. After waiting a minute, start the iPhone again by holding the Power button for a couple of seconds. Thus, the smartphone should reboot and reset the system error, as a result of which the menu screen with application windows will light up, and the smartphone will turn on as before.
It happens that the top Power button simply breaks due to old age, so there is no need to do a hard reboot, since this is also not the best option for an iPhone, the desired application may crash or an unwanted crash may appear later, and the information simply will not be saved . At the same time, all touch presses on the smartphone respond normally.
In this case, you should use a different method of turning on without using the power button. A very original way could be to turn the iPhone on/off using gestures.
How to turn on iPhone 3 or 6 using Assistive Touch gestures?
First, let’s launch the convenient assistant function, by going to the main “Settings” menu and selecting the “General” section, in which we will open the “Universal Access” option, where we will find the “Assistive Touch” function. Let’s open it by swiping, and then set the activity switch to the “On” position. As a result, a large floating translucent button will appear on the screen, with which you can not only turn the iPhone on and off, but also perform other commands. For example, you can change the volume or brightness of the screen, rotate the picture, change its scale, and so on.
So, with this convenient assistant at hand, let’s look at how it works. To activate its functions, swipe on it, after which a menu window will open, which will offer four options. If you need to turn off your iPhone, then select the “Device” option by clicking on it. Next, select the “Lock Screen” command, and then to turn off your iPhone, hold down this command for a few seconds and then swipe to the right so that the iPhone completely turns off, as when you press the Power button.
Another non-standard way in which you can turn on the iPhone 6S without using the Power button is to turn it on via a computer. To do this, connect to the computer via a USB port and cable, and then perform the power-on functions using the computer’s on-screen menu and following the commands.
What should you do if, after a hard reboot, your iPhone still won’t turn on? Try connecting your iPhone to your PC via a USB cable, or try starting your iPhone through the command menu on your computer. Copy all the data stored on the iPhone by creating a backup copy in iTunes, then update software on iPhone by downloading the latest version of iOS, then restore the data back to the phone. Perhaps by updating the program will fix the error and the power button will work again.
Recover iPhone using DFU mode
For example, you can restore or reflash your iPhone using DFU mode. To do this, you need to connect your smartphone to your computer using a USB cable. Check if the RedSn0w program is installed on your PC, if not, download it to your PC. Also make sure that the latest version of iTunes is installed on your computer. First you need to convert the iOS firmware of the file using the above-mentioned RedSn0w program . Then, using the iTunes program, we will launch the already converted file in DFU mode without using the smartphone buttons.
Download the RedSnow program and firmware in IPSW format. Next, launch RedSnow on your PC and press the “Extras” key, followed by the “Even More” key. In the window that opens, select the DFU IPSW command and confirm the choice by pressing the “OK” button. In the window presented, select the required type of device firmware. Next, download the selected firmware and save it for convenience on your computer desktop. Then we will open this firmware so that the RedSn0w program will convert it to the DFU format in a short time. After finishing the conversion process, we save it in a new format.
Now you need to start the iPhone through DFU mode through the iTunes program, for which we open it and at the top in the “Browse” section we find a button indicating the iPhone, which you need to press while holding down the Shift button if you are using Windows or the Alt button if you are using Mac OS ). As a result, we find the “Restore iPhone” command and run it.
In the proposed types of firmware, you must use the converted DFU file by activating it. Despite the warnings from iTunes, we click the “Restore” command.
If all the described procedures do not give positive results, then most likely the Power button needs to be replaced or does not function. Therefore, it is necessary to replace it by contacting service center or perform the replacement yourself.
Despite the almost annual release of new iPhone models, many still use older models, up to the 4th generation. Accordingly, due to wear and tear of the device, problems may arise in performance and even during normal startup. Today we’ll talk about how to turn on iPhone 4 if it turns off and won’t turn on.
These tips are relevant for iPhone models with a Home button. You can fix most software problems yourself, but if we are talking about hardware failure, then you cannot do without contacting a service center.
The first thing you should do when a problem occurs is to fully charge the battery. The battery may be completely drained, so you can't start your iPhone. Connect Charger together with the cable to the corresponding connector and look at the screen. After a few seconds, the corresponding indicator will appear on it. Below it is an icon indicating that it is connected to a power source.
However, in this situation, an iPhone 4 user may encounter the following problems:
- When you press the power button, the low battery indicator does not appear. In this case, you can blame the malfunction of the physical button.
- When the charger is connected, the corresponding icon does not appear, and the phone screen goes blank. There are two options here: the iPhone connector or the cable with the charger unit is faulty.
If after several hours of charging the phone still does not turn on, then it is worth checking the condition of the battery. If the battery on the iPhone 4 has not been changed since the purchase of the new device, then the problem is most likely there.
Not all users know how to turn mobile devices on and off correctly. It's possible that your iPhone 4 is fully functional, you're just doing the startup procedure incorrectly. To turn on your phone correctly, you must do the following:
- If the battery is low, connect your phone to a power source.
- After some time, press the power key on the top panel of the device and hold it for 10-15 seconds.
- As a result, the Apple logo should appear on the screen, and after 30-40 seconds the operating system will load.
If this option does not help, then test another one: simultaneously hold down the Power and Home keys for 10 seconds. Repeat the action several times. If the phone does not turn on, then the reason should be sought in faulty firmware or hardware failure.
If, when you try to turn on the phone, it does not respond or displays an endless boot in the form of the Apple logo, you should use Recover Mode to recover. To complete this procedure you will need:
- faulty iPhone 4;
- cable for connection to PC;
- installed iTunes package.
First you need to install the program and driver for iTunes, and then put your phone into recovery mode. To do this, hold down the Home key. Without releasing the button, connect the cable to the charging connector to connect to the PC.
At this point, iTunes should detect the connected device and display a corresponding notification that the iPhone is in Recovery mode. With this mode you can perform full reset or install OS firmware. In our situation, it is necessary to reset the device to factory settings. In the device information window, you can back up your personal data to your PC or iCloud. After that, start the procedure with the “Restore iPhone” button.
to install new version OS, you need to first download the firmware files to your computer.
If the breakdown of the iPhone 4 was preceded by mechanical impacts, water ingress, overheating, etc., then with a high degree of probability the cause is hardware damage. Take your phone to a service center for diagnostics, but first try turning it on using our instructions.
Video instruction
We bring to your attention a visual guide to restoring the functionality of the fourth iPhone. This video will perfectly complement the knowledge gained from our article!
Conclusion
We are completing the instructions for restoring iPhone 4 and hope that with the help of these recommendations you can easily identify the problem and turn on your mobile device! If you want to clarify any points from the instructions, please ask for help in the comments.
What to do if your iPhone won't turn on?
Today the iPhone is super popular and in demand. Its excellent screen, which gives an incredibly high-quality picture, has won millions of users. Practical design, popular interface, user-friendly applications will not leave you indifferent to this crown of Apple creation. But what to do even if such an ideal device has a problem. For example, it simply does not turn on. In this case, it is very important to correctly diagnose the cause. Only after this act.
You need to diagnose the problems first
We will describe the most common causes of problems and tell you what to do.
1. If the screen is black
When iphone looks at you with a blank black screen - don’t rush to panic. That doesn't mean it's over. Most likely the reason is that the battery is completely discharged. The second reason may be changed by iOS. It's easy to restore your device. The main thing is to do what we tell you.
If the reason is that the battery is low or the iPhone is left in a cold state for a long time, then first you should warm the device in your palms. Then connect the device for 15 minutes to charge. If the reason for a broken iPhone is a dead battery, it will turn on soon. If it doesn't, iOS may have hung up. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten or twenty seconds. Soon you will see what's on the screen the apple is burning. Release the buttons and iOS will start in about a minute.
Similar articles
If in this case the long-awaited apple does not burn, we will tell you what to do. Requires two or three times in a row turn on/ mute your iPhone. Then connect the charger for 15 minutes. This operation, as a rule, always gives a positive result.
If these steps are unsuccessful, try changing Charger and cable. Perhaps they are the culprits for the fact that the iPhone does not Included. If, in addition, you are not using an original, but cheap Chinese counterfeit, this may be the reason.
2. If the buttons don't work
There is also the following option: iPhone does not respond to button presses, and the screen latest application freezes on the screen. The first thing to do in this situation is to reboot the device in forced mode. To do this, hold down the "Sleep/Wake" and "Home" buttons at the same time, and after ten to fifteen seconds you will see the screen turn on again the apple is burning.
Similar articles
How turn on IPhone 4, if it comes out and doesn't Included
How turn on iPhone 4 if he went out and won't turn on.
IPhone 4 does not solve the problem.
What should we do.
It happens that the device still does not turn on. You should then connect to the charger and let your iPhone charge for fifty to sixty minutes. You will soon see that the charging screen is turned on. If this does not happen, carefully check the connector connector, Charger and cable. Perhaps they are the reason. Try the same procedure using a different power source.
3. If the iPhone does not turn on, but constantly the apple is burning
Another unpleasant situation that often occurs among users of the iPhone 4S and iPhone 5S is that when the screen is turned on, the apple goes out. In this case, do not test your nervous system's strength. Most likely, there was a problem restoring your iPhone from a backup. What should I do in this situation? Recovery mode and the computer on which you should run iTunes will help you. After connecting the USB cable, but for now only to the computer. Then, your action is to turn off the iPhone completely, getting rid of the apple, which is still lit, then goes out. To do this, press and hold the “HOME” and “POVER” buttons. Then press "HOME" and connect USB. This must be done until the iTunes logo appears on the screen, with an image of a plug next to it. A message will appear on the screen indicating that recovery mode is active. All you need to do is click the "Restore" button.
Similar articles
4. If all methods fail
What can you do if you try everything but the apple does not appear on your iPhone screen? There is a special recovery mode - DFU. It is designed to restore iOS firmware if all your other attempts fail. Please be clear that this mode should only be used as a last resort, because if it is activated, all data from the iPhone will be lost.
So, first you need to connect to the charger for five to ten minutes. After connecting to your computer, check whether the device was in iTunes. If this does not happen, go to DFU mode: hold down the HOME and POVER buttons simultaneously for ten seconds, then release POVER. Then, for fifteen to thirty seconds, hold down the HOME button until iTunes says “Recovery Mode.” Don't wait until the screen thanks you and shows you an apple as usual. A successful login to DFU is indicated by the absence of an image on the screen. If you want to restore the firmware on your iPhone, look for the "Restore iPhone" button in iTunes. To exit this mode, simply unplug the cable from the device and press HOME and POVER for ten seconds. After these manipulations iphone must reboot.
5. Help comes to the service center
If, despite all efforts, the iPhone could not revive on its own, we will have to turn to specialists for help. But remember that only if you treat it properly, your favorite gadget will serve you for many years.
If you think that the iPhone mobile device will always work without errors, then we want to disappoint you: any iOS device can encounter problems software glitches. There are situations when the screen on the iPhone 4 freezes, or it reacts, but this happens in an incorrect form. As a rule, few people have encountered such problems, and from this we can conclude that they do not know how to deal with such a situation. In fact, there are several ways in which such a problem can be solved, and that is what we will talk about today. After you select one of the options, you can, following the instructions, restart your mobile device without any problems and return it to normal mode.
Swipe
Let's first look at the question of how to reboot the iPhone 4 when it is working in normal mode, or rather, no freezes have occurred, the sensor responds perfectly, all the buttons respond. You need to press the power off key of your mobile device, which is also the “wake” key. We hold the button until two sentences appear on the screen: “Turn off the phone” or “Cancel this operation.” Now you need to touch the left side of the indicated key that appears on your screen with your finger and, without lifting your hand, move it to the right. A similar gesture is commonly called “Swipe”. If you did everything correctly, then the mobile device should start shutting down.
Launch
Now you need to wait until the phone screen goes dark, after which you should press the power button again, but do not hold it. If you followed everything according to the instructions, then the manufacturer’s logo should appear on the screen, and after a while the phone will be fully loaded.
But what should you do if your iPhone 4 is frozen, but this method does not help you in any way, since the keys do not respond? In this case, you will need to use the instructions that we provide below.
iPhone 4 is frozen, what to do in this situation
Let's now look at the second option for rebooting the iPhone mobile device. This option can be called forced, and it is suitable if the device completely or partially refuses to function in standard mode.
Remember that you can reboot your communicator from any state; for this you only need to know why the iPhone 4 froze, what to do about it and how to bring it back to life.
So, you should press and hold two main buttons at once - Power and Home. This should be done for a certain period of time (at least ten seconds). Even if you press these two buttons longer, the device's screen should go completely dark. In the next step, you need to release the keys at the same time. In some cases, the manufacturer’s logo immediately appears, the device starts loading, after which the device begins to function in standard mode.
Unfortunately, this may not happen, but then you will be required to press the Power button and not hold it.
If your iPhone 4 is frozen, you now know what to do, first of all, try using the forced reboot option. Using the above method, you can perform the described operation not only for iPhone, but also for iPad. It is not recommended to use this procedure regularly; use it only if it can cause harm. operating system mobile device.
Touch control
Now we will look at what to do if trying to reboot does not help. As you probably already know, manage mobile device it is possible without the help of keys. Manufacturers have taken into account that the buttons can still survive, but few know how to turn the device on or off in this way, and most importantly, how to reboot it when the device does not respond.
As you probably know, the iPhone and iPad did not come down to us from heaven... but from “ Jobs garage" Therefore, like everything material in this world, these gadgets are not ideal in their essence and can glitch and freeze. If your iPhone suddenly stops turning on, you've come to the right place.
In this article, we will look at the most common problems in which the iPhone does not turn on and try to find a solution for each of them. Now stop panicking and relax... Now we will fix everything...
If you dropped your iPad from the 14th floor, or washed your iPhone along with your jeans, this article is unlikely to help you. Here it should be clear that the device has suffered quite serious damage. In such a situation, it is better not to guess why the iPhone does not turn on, but to immediately contact a service center.
- If you do drown your iPhone in the toilet -
- You need to unlock your iPhone or bypass Activation Lock –
- iPhone stuck on "Slide to Update" screen -
- Don't know how to reboot your iPhone? –
Let's assume you don't know the reason why your iPhone stopped turning on. Then let's focus on the symptoms provided by your device, and then decide what can be done in each similar case.
Actually, here are the most common symptoms of a problematic iPhone:
- Constantly black screen
- Application frozen
- iPhone gets very hot
Let's look at each of the reasons in more detail, and also list possible steps and solutions to turn on the iPhone.
Constantly black screen
The most common case is when iPhone screen stays black no matter what buttons you press. Usually the reason for this is entirely or frozen iOS. In the rarest cases, it is possible that the firmware has crashed, but more on that below. The next couple of steps should get your device back into working order.
STEP 1 - If your iPhone has been in the cold for a long time, I give you a 100% guarantee that this is the reason that it does not turn on. Didn’t you know that lithium-ion batteries do not tolerate low temperatures and almost immediately “ lose their charge“? Warm up the phone in your palms and proceed to step 2.
STEP 2 - Connect iPhone to charger and leave for at least 10 minutes. If the reason was a low battery, the iPhone should turn on by itself. Otherwise, go to STEP 3.
STEP 3 - In this step, you need to hard restart your iPhone (it is better not to disconnect the charging cable). This procedure is slightly different for different iPhone models. More precisely, the way it is performed is different... To make it clearer to you, I have given brief instructions below:
- iPhone 4S/6S: hold down the HOME and POWER buttons for 15 seconds.
- iPhone 7: Hold down the POWER and - volume buttons for 15 seconds.
- iPhone 8/X/XR/XS/11: quickly press and release the volume button + , then do the same with - , then hold down the Side button (formerly called POWER) for 15 seconds.
If the combination above is successfully executed, the iPhone screen should first go dark and then display the glowing apple logo. Release the buttons and wait about one minute for iOS to fully launch.
STEP 4 - Sometimes it is necessary to turn the silent switch on/off a couple of times before performing STEP 2. Nobody knows why, but it REALLY helps if holding down the HOME and POWER buttons does nothing.
If these steps do not work, it may mean one of the following:
- Charging cable is faulty
- The power adapter has failed
- iPhone internal components are faulty
Find a 100% working charger and cable and try steps 2 – 4 again.
- If your iPhone won't charge - .
Don't be skeptical about the charging module and cable. Quite recently I replaced the original “lace”, because... When using it, the iPhone was charged to only 60%. Charging cables for Apple equipment are very “delicate” and can fail even without external damage.
Regarding power adapters (in common parlance - charger) I can say one thing - TRY TO USE ORIGINAL POWER ADAPTERS. Frankly, Chinese cheap fakes heat up and melt right during operation. This applies to both home 220V and car 12V chargers.
Now about the Lightning cables - the original cable is initially flimsy, but costs an expensive $19. I advise everyone to purchase a lightning cable from Ugreen, which is marked MFI(Made For iPhone) and accordingly uses the original lightning chip. For little money you get an eternal cable!
Well, what if you charged your iPhone with anything? (for example, cheap Chinese car adapters), it is possible that failure of the power controller or iPhone charging controller.
If this is your case, then the battery will simply be physically unable to accept a charge, because... The charging microcontroller does not issue the necessary command for this. I wrote about this in accessible language in a separate article -.
It’s difficult to do something here yourself and it’s best to contact a normal service center.
Application frozen
It also happens that an application on the iPhone may freeze or stop working normally. In this case, you need to force close it and thus unload it from the phone’s memory.
To force close the application, do this:
iPhone 4S – 8: double click on HOME button, and then swipe up to dismiss the hated application.
iPhone X: Swipe from the very bottom of the screen and hold your finger on the screen until the application tiles appear. Swipe up to unload a frozen application from memory.
iPhone doesn't respond to button presses
A couple of times my iPhone completely stopped responding to pressing physical buttons. At the same time, the screen of the last application usually remained on the screen, and I could not exit it. If you find yourself in a similar situation, simply “tough”.
To do this, hold down the HOME and POWER buttons for 10 seconds (for iPhone 7, 8 and X, see button combinations above).
The Apple apple is constantly lit on the screen
It happens that the iPhone does not turn on, but at the same time the Apple lights up on the screen, then disappears... and so on ad infinitum. This is usually caused by an unsuccessful iOS update, a clumsy jailbreak, or a failure when restoring an iPhone from a backup.
In such a situation, it may seem that the end of the phone has come. But don’t rush to conclusions, but rather try the following with the device.
In most cases, this problem can be solved by restoring iPhone to factory settings. There are several ways to do this, depending on your situation. Below I have provided both iPhone recovery modes.
STEP 1 - Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to your phone yet).
STEP 2 - Turn off iPhone by holding HOME + POWER buttons (for iPhone 7, 8 and X the combinations are listed above).
STEP 3 - Press and hold the HOME button and connect the USB cable to the device.
STEP 4 - Hold the button HOME until the iTunes logo and a picture of a plug are displayed on the device screen.
STEP 5 - A notification will appear on the computer screen indicating that the device is in recovery mode.
STEP 6 - Now just click on the Restore button... Be patient as... Before restoring your iPhone to factory settings, your computer will need to download latest version iOS from Apple servers. Wherein the phone will lie with the screen turned off and show no signs of life.
Even with good fast internet, the download process can take 40 minutes or more. If your Internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.
DFU mode
If your iPhone does not turn on, even after trying above, there is still one more method - (Device Firmware Update). To start your iPhone in DFU mode, you must strictly follow the instructions given in the link above.
If you need to put your iPhone X or 8 into DFU mode -
iPhone gets very hot
Very often, after an iPhone falls to the ground (even from a small height), its screen goes blank and the device itself no longer turns on. When trying to charge, the iPhone case immediately starts to get very hot, which is NOT normal.
In such cases, I would not experiment at home. May God save you from fire...
It is natural to think that after physical impact (falling to the ground), the internal components of the iPhone could fail. What exactly, I cannot say. It needs to be disassembled and diagnosed. In this case, find a normal service center and entrust this issue to professionals.
None of the methods helped
What? Still struggling with your iPhone or iPad and just can't get it to work? My advice to you is to save your nerves and go to a normal service center. There is no charge for the preliminary inspection.