This article contains information about mobile device. Here you can download the latest Android firmware for Samsung Galaxy Note II and you can also find out how to get root rights.
You can read more about root rights. Instructions for getting it are below.
When to update the firmware
- I want to install a new firmware to expand the capabilities of the smartphone;
- Recovering from an unsuccessful firmware is necessary
- The smartphone constantly reboots for no reason;
- The smartphone does not turn on.
What firmware do we have
To download the firmware Android 8.0 Oreo, 7.1 Nougat, 6.0 Marshmallow, Android 5.1 Lollipop on samsung galaxy Note II read the article in full - this is important. Installing a new available version of Android, you will be surprised by the new possibilities. And also you can find the official version of the MIUI firmware of different versions and custom original firmware.
By leaving a review through the comment form, you help others to learn about the pros and cons of the Samsung Galaxy Note II and make a purchasing decision.
Firmware available: In stock.
Download firmware
When writing a review through the comment system, indicate a real email if you have problems installing the firmware. Please note that the site administration may not answer questions immediately, depending on the workload. In addition to the administration, ordinary users can answer and help you, just like on the forum.
The manual on how to install the firmware is on the links below. Firmware download for Samsung Galaxy Note II is available via torrent with instructions.
Firmware installation instructions
To download, select the firmware you need and click on the link.
To install do the following:
- Download the file with firmware and special program
- Run the program on the computer
- Select the required firmware version
- Follow the instructions from the file archive
Samsung Galaxy Note II Firmware Video
Somehow, the Samsung Galaxy Note 2 didn’t work out with official updates: officially Note 2 didn’t even receive Android 5 (not to mention Android 6), both from Samsung (despite ) and from the CyanogenMOD community. However, there is also CyanogenMOD Unofficial, and the lack of an “official” status of custom (!) Firmware should not be an obstacle.
There is something to choose?
Today there are two main CyanogenMOD 13 Unofficial firmware based on Android 6.0.1 for Samsung Galaxy Note 2 GT-N7100: and . I, it was, first installed the build from Ivan - in fact, it was the only build mentioned in . The installation went well, the menus opened smoothly, and even small glitches with the distribution of application rights did not really bother me. If not for one “but”: the batteries lasted exactly until lunch. Then Ivan smoothly disappeared not only from development, but also stopped answering questions in the XDA topic, and then I decided to try installing the CM13 build from another author. Ivan then, a couple of weeks later, wrote to the XDA thread that, due to important events in his life, he was not yet up to the firmware, so I just made sure that the decision was correct.
Firmware CM 13 Unofficial Temasek.
So, CM13 Unofficial Temasek. The firmware is stable, suitable for daily use. With normal use, the battery lasts all day. Also, doze works. The firmware includes Boeffla sound, however, in order to activate and configure it, you will have to install .
In general, I don’t really like it when developers saturate the assembly with their own “tweaks” and settings, but in the case of CM13, there is simply no choice yet. So far, this is the only developer who does at least something. And it does well, I must say.
Installation
There are no problems with installation. The firmware is being installed. True, there is a nuance associated with installing the Google application package, which is discussed below.
Of course, a full backup is required. At the first installation, it is recommended to do a full wipe, including cleaning the internal memory. I'm not strong in the technical part, but judging by the reviews, users who cleared before installing internal memory less common glitches.
Now about the Google Applications Package (GAPPS). By default, CM13 comes without built-in Google apps, but you can download and install them yourself. There are two main points to be aware of.
The first. It is necessary to install the minimum possible GAPPS package. This is due to the fact that CyanogenMOD 13 does not use the standard Google camera, but a third-party one. For this reason, if you take the GAPPS extended package containing the Google camera, these cameras will conflict with each other during installation. Personally, I installed, although there is an even smaller one. Subsequently, the Google Camera can be installed from the Play Market.
UPD: We can say that the first recommendation is no longer as relevant as before. There will be no conflict, just the corresponding SM13 services will be replaced Google services. However, the forums still advise you to install the minimum package, because. nevertheless, there are cases of incorrect operation of the device if a non-minimal package was installed.
Second . GAPPS must be installed immediately after installing the firmware, at this reboot and/or clear cache/dalvik after installation Firmware cannot be! That is, they installed the firmware, went back, installed GAPPS, then cleared the cache / dalvik and then rebooted.
What is missing?
The first and foremost thing you will lose by installing the CM13 is support for stylus-related features. By itself, of course, the stylus works, and you can even find a special item in the menu where you can enable gesture support. However, in fact, the gestures do not work. Also, I was not able to enable support for pressure levels, so I won’t be able to draw beautifully in a graphical editor either. Multi-window mode is also not supported.
Needless to say, there are no “branded applications” of Samsung here either, just as there is no link to a Samsung account. So if you actively use, for example, S-planner or S-memo, this is a serious reason to think about the advisability of switching. However, I did not check, but perhaps these applications can be installed separately. There is no Aircommand either, however, on the form it is advised to look for applications that implement similar functionality.
instead of a conclusion.
The transition from Samsung firmware to CyanogenMod 13 causes me rather conflicting feelings. On the one hand, you immediately lose all the "proprietary" Samsung features that make the Galaxy Note 2 unique. Yes, I'm talking about the Wacom stylus. This is perhaps the most important feature that I miss, although I can’t say that I used it often. I hope that since stylus gestures still do not work, then perhaps full stylus support is only a matter of time. If someone uses CM12.1 - tell us how things are with the stylus there?
On the other hand, you get the latest version of Android, which not only offers a much more convenient way to manage your smartphone, but also works noticeably faster. A nice bonus is the ability to “smart unlock” using bluetooth devices.
What is more important - everyone decides for himself.
UPD For those who decide to switch to CM13 from touchwiz-based firmware, but at the same time actively use the camera, it will be useful.
There was a need to update the Galaxy Note 2 N7100 to latest version Android, and the official developer of available options can not yet offer? Custom firmware will come to your aid. Below you can find a full description and step by step instructions about how you can update your gadget's operating system to Android 4.4.2 KitKat using Phoenix custom ROM.
Judging by the reviews, this update option is the most stable and reliable, unlike its counterparts. Compared to the standard firmware of official developers, Phoenix firmware has its own advantages. It may seem surprising, but this version is faster, while the power consumption is somewhat reduced. That is, thanks to the installation of such an update, you get high system performance and maximum “survivability” of your device.
To prepare the device for the update, you should perform several mandatory procedures described below.
You should start by opening full access to your gadget or, as they say,. This has its drawbacks, since the procedure is, in fact, invalid. As a result, the Note 2 warranty is automatically voided. You need to restore it by returning to the factory restrictions, as well as by installing the latest official version of the Android firmware. After that, it is mandatory to unlock the loader (bootloader) and install custom recovery (or).
If the information stored on the phone is very important to you, then you need to make this data. Installing this firmware involves complete removal information, so you need to think about the need to save important contacts, favorite programs and other useful information.
In addition, you need to create something like a system restore point (called a Nandroid backup). If an unrecoverable error occurred during the installation process, or Phoenix just didn't live up to your expectations, thanks to this feature, you can return to the previous version of the software.
Before installation, prepare the USB cable and turn on the computer.
Be sure to disable all anti-virus programs on your computer and device.
The installation process is quite long, so you need to properly charge the phone before starting the firmware.
. To do this, you need to enter the "menu", select the "settings" item, and click on the "developer options" line.
This firmware manual is only suitable for Galaxy smartphone Note 2 (Model N7100).
Installation latest update Android on Galaxy Note 2 N7100 using Phoenix ROM firmware.
1. Download itself, put the archive on the PC desktop. We leave it packed!
2. Using a cable, connect the phone to the computer.
3. We send the archive to the smartphone's memory card.
4. Disconnect the cable from the computer.
5. Turn off Galaxy Note 2.
6. After that, you need to start the device in recovery mode.
7. Next, we erase absolutely all data on the phone and clean the cache memory ( wipe data factory reset and wipe cache partition). To erase Dalvik Cache, select the option advance, and after that wipe dalvick cache.
8. The next step is to directly install the firmware itself. In the main menu, you need to select the installation from the archive (item " install zip from SD card"), and then " choose zip from SD card". Open the update installation file and download it.
9. Upon completion of initialization, we return to the main menu of the device and reboot it ( reboot system now).
Xiaomi Mi Note 2 was released in October 2016. Here we discuss the release of Android 9.0 Pie update for Xiaomi Mi Note 2.
Finally, Google has released the ninth iteration of the Android OS called Android 9.0 Pie. The update is out for Pixel supported devices and several other Android Beta supported OEMs. After Android users received four beta versions of Android P, Google named Android 9.0 as Android Pie. In the coming months, all devices that have been registered in the Android P beta program, including OnePlus 6, Oppo R15 Pro, Vivo X21 and more, are expected to be the first to receive android update P.
In terms of specifications, Xiaomi Mi Note 2 has a 5.7-inch display with a screen resolution of 1080 x 1920 pixels. It is powered by Qualcomm MSM8996 Snapdragon 821 processor coupled with 4/6GB random access memory. The phone holds 64/128 GB of internal memory. The camera on the Xiaomi Mi Note 2 features a 22.5MP rear camera and an 8MP front camera. It has a non-removable 4070 mAh lithium-ion battery with fast charging battery (Quick Charge 3.0). It also has a fingerprint sensor on the front.
When will Xiaomi release Android 9.0 Pie update for Xiaomi Mi Note 2?
There is currently no custom android firmware 9.0 Pie for Xiaomi Mi Note 2. So stay tuned for more information about this update.
You may like:
What is Android 9.0 Pie?
Android 9.0 Pie is the ninth iteration and major update of the Android OS from Google. New Android Pie brings a couple of design changes to the Android Oreo successor, but the most notable one is navigation system gesture based. Other features of Android 9 Pie are the new UI design Quick Settings, redesigned volume slider, extended battery with AI support, rounded UI corners, improved adaptive brightness, manual theme selection, Android Dashboard, which Google calls Digital Wellbeing (Digital Wellbeing is designed by to help you use your phone less, and therefore, Google provides statistics to help you know how much you use your phone during the day, which apps you spend the most time in), and other features.
Do you want to try Android 9.0 Pie on Xiaomi Mi Note 2?
If you want to enjoy the features of Android 9.0 Pie, please follow the guide below.
Make sure you have unlocked bootloader and installed TWRP Recovery on Xiaomi Mi Note 2.
Instructions:
- Supported on Xiaomi Mi Note 2.
- Download .
- Download for any Android devices.
- Best: I like Flux.
- Download Volume Slider Android Pie: Free | paid .
- Enjoy the features of Android 9.0 Pie on your device.
You can also wait for Lineage OS 16.0 which will be based on Android 9 Pie.
Instructions for installing the official single-file firmware on Samsung Galaxy Note 2 (GT-N7100, GT-N7105).
Drivers and programs
Attention!
To install the official stock firmware on the Galaxy S3 and return the phone state ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air is enough follow the instructions provided.
Installation instructions
Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.
Perform a data reset on the device.
To do this, go to the settings on the tab " Accounts» to the section « Archive and reset”, select the item “ Reset device” and press the button “ Delete everything". The phone will reboot.
Run Odin PC as administrator.
Put the device into download mode ( Download Mode).
To do this, simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.
In this state, connect the smartphone to the computer. In Odin, the inscription " COM».
Click on the button " AP» and select the TAR archive of the firmware.
Items « Auto Reboot" and " F.Reset Time" must be activated, a " Re-Partition", if active - must be disabled.
Click on the button " start". The firmware installation process will begin.
At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
ATTENTION!
If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", and then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.